document number: 88877 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated ultrafast rectifier fgp20b thru fgp20d vishay general semiconductor new product features ? superectifier structure for high reliability condition ? cavity-free glass- passivated junction ? ultrafast reverse recovery time ? low forward voltage drop ? low leakage current ? low switching losses, high efficiency ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. mechanical data case: do-204ac, molded epoxy over glass body molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade base p/nhe3 - rohs compli ant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 cla ss 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics i f(av) 2.0 a v rrm 100 v to 200 v i fsm 50 a t rr 35 ns v f 0.95 v i r 2.0 a t j max. 175 c do-204ac (do-15) superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol fgp20b fgp20c fgp20d unit maximum repetitive pe ak reverse voltage v rrm 100 150 200 v maximum rms voltage v rms 70 105 140 v maximum dc blocking voltage v dc 100 150 200 v maximum average forward rectified current 0.375" (9.5 mm) lead length at t l = 75 c i f(av) 2.0 a peak forward surge current 8. 3 ms single half sine-wave superimposed on rated load i fsm 50 a operating junction and storage temperature range t j , t stg - 65 to + 175 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88877 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 15-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fgp20b thru fgp20d vishay general semiconductor new product notes (1) thermal resistance from junction to ambient 0.375" (9.5 mm) l ead length mounted on pcb with 0.47" x 0.47" (12 mm x 12 mm) coppe r pads (2) thermal resistance fr om junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsinks note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current de rating curve fig. 2 - maximum non-re petitive peak forward surge current electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol fgp20b fgp20c fgp20d unit maximum instantaneous forward voltage 2.0 a v f 0.95 v maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 2.0 a t a = 100 c 50 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 35 ns typical junction capacitance 4.0 v, 1 mhz c j 45 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol fgp20b fgp20c fgp20d unit typical thermal resistance r ? ja (1) 60 c/w r ? jl (2) 20 ordering information (example) preferred p/n unit weight (g) preferred package code ba se quantity delivery mode fgp20d-e3/54 0.424 54 4000 13" diam eter paper tape and reel fgp20d-e3/73 0.424 73 2000 am mo pack packaging fgp20dhe3/54 (1) 0.424 54 4000 13" diameter paper tape and reel fgp20dhe3/73 (1) 0.424 73 2000 ammo pack packaging 0 3.0 average forward recited current (a) lead temperature (c) 2.0 1.0 0 25 50 75 100 125 150 175 p.c.b. with 0.47 " x 0.47 " (12 mm x 12 mm) copper pad s 0 10 20 30 40 50 60 1 100 10 peak forward s urge current (a) number of cycle s at 60 hz t j = t j max. 8.3 m s s ingle half s ine-wave
document number: 88877 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fgp20b thru fgp20d vishay general semiconductor new product fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical j unction capacitance package outline dimensions in inches (millimeters) 0.4 0.6 0.8 1.0 1.2 1.4 in s tantaneou s forward voltage (v) 0.01 0.1 10 1 100 in s tantaneou s forward current (a) 0.2 t j = 150 c t j = 125 c t j = 25 c t j = 175 c t j = 25 c pul s e width = 300 s 1 % duty cycle 0.001 0.01 1 0.1 10 100 0 20406080100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e leakage current (a) t j = 150 c t j = 125 c t j = 25 c t j = 175 c 0.1 10 100 1000 1 1 10 100 rever s e voltage (v) junction capacitanc e (pf) do-204ac (do-15) 0.034 (0.86) 0.028 (0.71) dia. 0.140 (3.6) 0.104 (2.6) dia. 1.0 (25.4) min. 0.300 (7.6) 0.230 (5.8) 1.0 (25.4) min.
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
